Connection Diagrams

Connection Diagrams

In the following connection diagrams, the left side shows the terminals on the camcorder and the right side shows (for reference only) an example of terminals on a connected device.

Connection A

HDMI

 

 

Type: Digital Quality: High definition Output only

Connect to a high-definition TV (HDTV) with an HDMI input terminal. If your HDTV supports HDMI-CEC or 1080p input, you 125 can activate these functions with the 6 [Control for HDMI] and [HDMI 1080p Output] settings, respectively. You

can check the standard of the current output signal with the 6 [HDMI Status] setting.

(HDMI mini

HTC-100 HDMI Cable

(standard HDMI

(optional)

connector)

connector)

 

About the HDMITM connection

The HDMI (High-Definition Multimedia Interface) connection (A) is a convenient all-digital connection using a single cable for both video and audio. When you connect the camcorder to an HDTV equipped with an HDMI terminal, you can enjoy video and audio playback at the highest quality.

-The HDMI OUT terminal on the camcorder is for output only. Do not connect it to an HDMI output terminal on an external device, as this may damage the camcorder.

-While the camcorder is connected to an HDTV using connection A, there will be no video output from other terminals.

-Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.

-Depending on the HDTV, correct playback of personal video content may not be possible using connection A. Try one of the other connections.

Connection BComponent Video

Type: Analog Quality: High Definition Output only

Connect to a high-definition TV (HDTV) with component video input terminals. Change the following settings on the camcorder:

- 6 [AV/Headphones] to [HAV]

 

Red

CTC-100/S Component Cable

Blue

 

(supplied)

Green

 

White

STV-250N Stereo Video Cable

Red

(supplied)