Moving the Scanner
●When moving the scanner, always hold it with both hands to avoid dropping it. The scanner weighs approximately 3.2 kg (7.1 lb).
●Make sure to disconnect the interface cable and AC adapter before moving the scanner. If the scanner is transported with these items connected, the plugs and connectors may be damaged.
Handling
WARNING
Note the following precautions whenever using the scanner. Failure to do so may result in a fire or electric shock.
●Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable substance near the scanner.
●Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, and do not pull or excessively bend the power cord.
●Never connect the power cord when your hands are wet.
●Do not connect the scanner to a multi plug power strip.
●Do not knot or coil the power cord as this may result in a fire or electric shock. When connecting the power cord, make sure that the power plug is securely and completely inserted into the power outlet.
●Do not use a power cord or AC adapter other than the ones provided with this scanner.
●Do not take the scanner apart or modify it.
●Never try to take the AC adapter apart or modify it in any way, as this is dangerous.
●Do not use flammable spray near the scanner.
●When cleaning the scanner, push the power button to turn it OFF and disconnect the power cord from the power supply.
●Clean the scanner using a slightly dampened cloth which has been well wrung out. Never use alcohol, benzene, paint thinner, or any other flammable substances.
●If the scanner makes strange noises, or gives off smoke, heat, or strange odors, or the scanner does not function or other abnormalities occur when you use the machine, immediately push the power button to turn it off, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced.
●Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever become damaged, immediately push the power button to turn it OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced.
●Before moving the scanner, be sure to push the power button to turn it OFF, and disconnect the power plug from the power outlet
CAUTION
●Do not install the scanner on a surface that is unstable or tilted, or in an area subject to excessive vibrations, as this may cause the scanner to fall, resulting in personal injury or damage to the scanner.
●Never place small metal objects such as staples, paper clips, or jewelry on the scanner. These items may fall into the scanner, and cause a fire or electric shock. Should such objects ever fall inside the scanner, immediately push the power button to turn it OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced.
●Do not install the scanner in a humid or dusty location. Doing so might cause a fire or electric shock.
●Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in personal injury.
●Connect only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or
17