Back Up / Restore

Use the [Back Up] and [Restore] buttons to back up the configuration file (settings, registered jobs, etc.) of CaptureOnTouch and restore the settings from the backup data.

IMPORTANT

Please note that when a job with the output method set to [Send to SharePoint] is registered, the setting items related to SharePoint will not be backed up.

[Back Up] button

Back up the settings of CaptureOnTouch to a backup file (*.reg). You can store the initial settings of CaptureOnTouch by performing a backup before you first use CaptureOnTouch.

[Restore] button

Restore the settings from the backup registry file.

When using multiple scanners, you can back up the environmental settings of one scanner and then perform a restore on the other scanners so that all of the scanners have the same settings.

[E-mail settings] Tab

On the [E-mail settings] tab, set the maximum size for the image files to be attached to e-mail.

Maximum size of attached file

Select the [Display confirmation message if file size exceeds the above] check box to display a confirmation message when an attached file exceeds the maximum size.

•For Scan First, a confirmation message appears if the file size of scanned images is larger than the file size set here.

•For Select Scan Job, a confirmation message appears if the set file size is exceeded during scanning.

[Theme] Tab

On the [Theme] tab, specify the appearance of the main screen of CaptureOnTouch.

Select theme

Specify the appearance type for the main screen of CaptureOnTouch with [Select theme].

47