Problem 12 Memory becomes insufficient and scanning stops.

Solutions

If you configure scanning conditions that use a large

 

amount of the computer's memory, scanning may stop

 

because of insufficient memory. Although this depends

 

on the computer's memory size, the possibility of

 

insufficient memory increases if any of the following

 

scanning conditions overlap.

 

• [Color Mode] is set to [24-bit Color]

 

• A large page size (e.g. Legal) is specified as the

 

[Page Size]. Alternatively, the page size is set to

 

[Scanner's Maximum].

 

• A high resolution (600dpi etc.) is specified for [Dots

 

per inch].

 

If an error message appears due to insufficient memory

 

while scanning is in progress, exit the application,

 

change the scanning conditions (e.g. reduce the

 

resolution or page size) and then try scanning again. In

 

addition, the amount of memory used can be contained

 

by turning off [Moire Reduction] and [Please change

 

prevent bleed through and remove] if they are set to on.

74