3Custom Function SettingsN

C.Fn-10 Assign SET button

You can assign a frequently-used function to <0>. Press <0> when the camera is shooting-ready.

0:Normal (disabled)

1:Image quality

Press <0> to display the image-recording quality setting screen on the LCD monitor.

Press the <S> key to select the image-recording quality, then press <0>.

2:Flash exposure compensation

When you press <0>, the flash exposure compensation setting screen will appear.

3:LCD monitor On/Off

Assigns the same function as the <B> button.

4:Menu display

Assigns the same function as the <M> button.

5:ISO speed

Assigns the same function as the <Z> button.

C.Fn-11 LCD display when power ON

0:Display on

When the power switch is turned on, the shooting settings will be displayed (p.44).

1:Previous display status

If you pressed the <B> button and turned off the camera while the LCD monitor was off, the shooting settings will not be displayed when you turn on the camera again. This helps to save battery power. The menu screens and image playback will still be displayed when used.

If you pressed the <B> button and turned off the camera while the LCD monitor was on, the shooting settings will be displayed when you turn on the camera again.

196

Page 196
Image 196
Canon 550D instruction manual 196