Canon 550D FAutomatic Sensor Cleaning, Cleaning the Sensor Now, Select Clean nowf, 150

fAutomatic Sensor Cleaning

Whenever you set the power switch to <1> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can execute the sensor cleaning at anytime as well as disable it.

Cleaning the Sensor Now

1 Select [Sensor cleaning]. Under the [6] tab, select [Sensor cleaning], then press <0>.

2 Select [Clean nowf].

Select [Clean nowf], then press <0>.

Select [OK] on the dialog screen, then press <0>.

XThe screen will indicate that the sensor is being cleaned. Although there will be a shutter sound, a picture is not taken.

For best results, do the sensor cleaning while the camera bottom is placed on a table or other flat surface.

Even if you repeat the sensor cleaning, the result will not improve that much. Right after the sensor cleaning is finished, the [Clean nowf] option will remain disabled temporarily.

Disabling Automatic Sensor Cleaning

In step 2, select [Auto cleaningf] and set it to [Disable].

XThe sensor cleaning will no longer be executed when you set the power switch to <1> or <2>.

150