q: Manual Flash
You can set the flash output from 1/128 power to 1/1 full power in 1/3- stop increments.
Use a
1 Press the <D> button so that <q> is displayed.
2 Set the flash output. Press the <8> button.
XThe flash output blinks.
Turn the <9> dial to set the flash output, then press the <8> button.
Press the shutter button halfway to see the effective flash range displayed.
Flash Output Display
When you change the flash output during shooting, the table below makes it easier to see how the stop changes such as 1/2
For example, when you decrease the flash output to 1/2, 1/2
(Example) | Figures for decreased flash output → |
|
|
| ||||
1/1 | 1/1 | 1/1 | 1/2 | 1/2 | 1/2 | 1/4 | ••• | |
1/2 +0.7 | 1/2 +0.3 | 1/4 +0.7 | 1/4 +0.3 | ••• | ||||
|
|
|
←Figures for increased flash output
22