Fully Automatic Flash Shooting
When you set the camera’s shooting mode to <V> (Program AE) or <U> (Full Auto),
1
2
Set the Speedlite to <a>.
Press the <D> button so that <a> is displayed.
Focus the subject.
Press the shutter button halfway to focus.
XThe shutter speed and aperture will be displayed in the viewfinder. Check that the <Q> icon is lit in the viewfinder.
3 Take the picture.
Check that the subject is within the effective range displayed on the LCD panel.
XRight before the shot is taken, a preflash is fired, then the main flash is fired.
XIf a standard flash exposure was obtained, the flash exposure confirmation lamp will light for about 3 sec.
<a> will be displayed on the LCD panel even if the camera is compatible with
If the flash exposure confirmation lamp does not light, move closer to the subject and take the picture again. With a digital camera, you can also increase the camera’s ISO speed.
11