Installing the Batteries
Install four
| 1 | Open the cover. |
|
|
| Use your thumb to press the battery | |
|
| compartment lock lever, then slide it | |
|
| as shown by the arrow c to open the | |
|
| cover. |
|
| 2 Install the batteries. | ||
|
| Make sure the + and – battery | |
|
| contacts are properly oriented as | |
|
| shown in the compartment. | |
| 3 Close the cover. |
| |
|
| Close the battery compartment cover | |
|
| and slide it as shown by the arrow. | |
|
| X When the cover clicks in place, it will | |
|
| be locked. |
|
Recycling Time and Flash | ount (with | ||
Recycling Time | Flash Count | ||
Quick Flash |
| Normal Flash | |
|
| ||
Approx. 0.1 - 2.5 sec. | Approx. 0.1 - 5 sec. | Approx. 100 - 700 |
Based on new
Using
If you change the batteries after firing many flashes continuously, be aware that the batteries might be hot.
Use a new set of four batteries of the same brand. When replacing the batteries, replace all four at one time.
8