Setting the Flash Output for Each Slave
With manual flash and multiple Speedlites, you can set a different flash output for each slave unit.
All settings are done with the master unit.
1 Press the <D> button so that <q> is displayed.
2 Press the <G> button so that <y> blinks.
3 Select the flash ratio.
Turn the <9 > dial to select <l> or <j>, then press the <8> button.
4 Set the flash output. Press the <8> button.
X The slave ID <m> will blink.
Turn the <9> dial to set the flash output for <m>, then press the <8> button.
The slave ID <n> will blink. Turn the <9> dial to set the flash output for <n>, then press the <8> button.
The slave ID <o> will blink. Turn the <9> dial to set the flash output for <o>, then press the <8> button.
XAll the slave IDs will light.
45