3Lens Peripheral Illumination Correction

Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumination. The default setting is [Enable].

1Select [Peripheral illumin. correct.].

Under the [1] tab, select

[Peripheral illumin. correct.], then press <0>.

2Set the correction setting.

On the screen, check that the attached lens’ [Correction data available] is displayed.

If [Correction data not available] is displayed, see “About the Lens Correction Data” on the next page. Select [Enable], then press <0>.

3 Take the picture.

The image will be recorded with the corrected peripheral illumination.

Without correction

With correction

102