Before You Start

3Setting the Power-off Time/Auto Power Off

You can change the auto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button.

1Select [Auto power off].

Under the [5] tab, select [Auto power off], then press <0>.

2 Set the desired time.

Select the desired setting, then press <0>.

Even if [Off] has been set, the LCD monitor will turn off automatically after 30 min. to save power. (The camera’s power does not turn off.)

3Setting the Image Review Time

You can set how long the image is displayed on the LCD monitor immediately after capture. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off].

1 Select [Image review].

Under the [1] tab, select [Image review], then press <0>.

2Set the desired time.

Select the desired setting, then press <0>.

If [Hold] is set, the image will be displayed until the auto power off time elapses.

50