
Using Wireless FlashN
Setting the Flash Output Manually for Wireless Flash
When [Flash mode] is set to [Manual flash], the flash output can be set manually. The flash output settings ([1flash output], [Group A output], etc.) that can be set will differ depending on the [Wireless func.] setting (see below).
[Wireless func.: 0]
[Firing group: 1All]: The manual flash output setting will be applied to all the external Speedlites.
[Firing group: 1(A:B)]: You can set the flash output separately for slave groups A and B.
[Wireless func.: 0+3]
[Firing group: 1All and 2]: The flash output can be set separately for the external Speedlite(s) and
[Firing group: 1(A:B) 2]: You can set the flash output separately for slave groups A and B. You can also set the flash output for the
147