Using Wireless FlashN

Fully Automatic Shooting with One External Speedlite

This shows the most basic setup for fully-automatic wireless flash with one Speedlite.

Steps 1 to 3 and 6 to 7 apply to all wireless flash shooting. Therefore, these steps are omitted in the other wireless flash setups explained on the pages hereafter.

On the menu screens, the <0> and <1> icons refer to the external Speedlite, and the <3> and <2> icons refer to the built-in flash.

1 Press the <I> button to pop-up the built-in flash.

For wireless flash, be sure to pop-up the built-in flash.

2 Select [Flash control].

Under the [1] tab, select [Flash control], then press <0>.

3Select [Built-in flash func. setting].

Select [Built-in flash func. setting], then press <0>.

4Select [Flash mode].

For [Flash mode], select [E-TTL II], then press <0>.

140