Using Wireless FlashN

5Select [Wireless func.].

For [Wireless func.], select [0], then press <0>.

XUnder [Wireless func.], [Channel], etc., will be displayed.

6

7

8

Set [Channel].

Set the channel (1-4) to the same one as the slave unit.

Select [Firing group].

For [Firing group], select [1All], then press <0>.

Take the picture.

As with normal flash shooting, you can set the camera and take the picture in the same way.

To terminate wireless flash shooting, set [Wireless func.] to [Disable].

Setting [E-TTL II meter.] to [Evaluative] is recommended.

Even if you disable the built-in flash from firing, it will still fire to control the slave unit. Depending on shooting conditions, the flash firing for slave unit control may be visible in the picture.

The slave unit cannot fire a test flash.

141