Special Modes for Other Purposes

3Press the shutter button all the

way down.

XXThe camera now enters shooting standby mode, and [Look straight at camera to start count down] is displayed.

XXThe lamp blinks and the self-timer sound is played.

4Join the subjects in the shooting area and look at the camera.

XXAfter the camera detects a new face, the

lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will shoot.

zzTo cancel shooting after you have triggered the self-timer, press the <n> button.

•Even if your face is not detected after you join the others in the shooting area, the camera will shoot about 15 seconds later.

•To change the number of shots, press the <o><p> buttons after choosing [] in step 1. [Blink Detection] (=81) is only available for the final shot.

•The zoom factor cannot be changed with the <> button after you press the shutter button all the way down.

105