Protecting Images

2Choose an image.

zzPress the <q><r> buttons or turn the <5> dial to choose an image, and then press the <m> button. [] is displayed.

zzTo cancel selection, press the <m> button again. [] is no longer displayed.

zzRepeat this process to specify other images.

3Protect the image.

zzPress the <n> button. A confirmation message is displayed.

zzPress the <q><r> buttons or turn the <5> dial to choose [OK], and then press the <m> button.

•Images will not be protected if you switch to Shooting mode or turn

the camera off before finishing the setup process in step 3.

Selecting a Range

1Choose [Select Range].

zzFollowing step 2 on =175, choose [Select Range] and press the <m> button.

2Choose a starting image. zzPress the <m> button.

176