Using Optional Accessories

3Choose shooting mode <G>, <M>, <B>, or <D>.

zzFlash settings can only be configured in these modes. In other modes, the flash is adjusted and fired automatically, as needed.

4Set the white balance to [h] (=122).

5Configure the external flash.

zzPress the <n> button, choose [Flash Control] on the [4] tab, and then press the <m> button.

XXOptions already set on the flash itself are displayed.

zzPress the <o><p> buttons or turn the <5> dial to choose an item, and then adjust the setting by pressing the <q><r> buttons.

zzAvailable settings vary depending on the shooting mode and the flash attached (=229).

• Settings for the built-in flash cannot be configured while a Speedlite EX series flash is attached, because that setting screen is no longer accessible.

•You can also access the setting screen by pressing the <h> button for at least one second.

•Flash settings in [] shooting mode can be configured just as they are in <G> mode.

•580EX II only: [Flash Control] is not available if the external flash has been set up for stroboscopic flash.

•320EX only: Auto LED lighting is only available in low-light movie recording or in Movie mode. In this case, the [] icon is shown.

228