Canon 7490 Compliance

Compliance

CAUTION IN USING THE PROJECTOR VIA NETWORKS

● When you find a problem with the projector, remove the power cable immediately and

inspect the unit. Using the projector with failure may cause fire or other accidents.

● If you remotely use the projector via networks, carry out a safety check regularly and

take particular care to its environment. Incorrect installation may cause fire or other

accidents.

● We assume no responsibility for the loss or damage of data, or damage of the computer

caused by using this projector. Mak ing back-up copies of valuable data in your

computer is recommended.

Model: LV-7490

This device complies with Part 15 of the FCC Rules. Op eration is subject to the following t wo

conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any inter ference received , inclu ding int erference that may

cause undesired operation.

Note: This equipment has be en tested and found to comply with th e limits for a Class B

digital device, pursuant to Par t 15 of the FCC Rules. These limits are designe d to provide

reasonable protection against harmful interfere nce in a residential installation. This equip -

ment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a par ticular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encourag ed to try to correct

the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the eq uipment into an outle t on a circ uit dif ferent from that to which the

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subp art B of Part of FCC

Rules.

Do not make any changes or modif ications to the equipment unless other wise specified in

the instructions. If such changes or modifications should be made, you could be required to

stop operation of the equipment.

Canon U.S.A., Inc.

One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.

Tel No. (516)328-5600

This class B digital apparatus complies with Canadian ICES-003.