55
ENGLISH
Q&A
Q&A

Installation/Access

Q Why doesn’t the setting page appear in my web browser?
A Following causes are possible. Please check them.
1. The projector does not connect to the network.
Check LED indicators status (+ p.12).
- Check the connection of LAN cable if the LINK Lamp does not light green.
- Check the network configuration of the projector if the ACT Lamp does not
blink orange.
2. Wrong network configuration of the computer.
Check the network configuration of the computer.
3. The proxy setting of the web browser is not set correctly (+ p.52).
4. The computer does not provide TCP/IP protocol.
Q How can I restrict access from the computer.
A 1. Please use the password authentication function on the login page (+ p.23).
2. Please use the IP filterin g fun ction provid ed wi th th e gatew ay (rou ter) to
restrict the accessing f rom the computer. For further information please con-
sult your network administrator.
Q Can I access the projector installed on the company’s local area network

from a remote location?

A There are some ways to access to the projector in the LAN, but you must consult
your network administrator for security reason.
☛ Use of modem
(Connect to the company’s network from your home or some other places by
using modem.)
☛ Use of private line
(Connect to the company’s network from the br anch of fice or maintenance
office by using private line.)
☛ Use of internet
(Connect to the company’s net work from your h ome, branch office or som e
other places by using the internet.)