Canon 800II Scanner Settings

Chapter 2 Specifying the Scanner Settings

20

Scanner Settings

Use this screen to specify the settings for scanning.

The basic settings are specified from the Scanner setting... dialog box.

<Scanner Settings>

Mode

Selects the scanning mode.

[Black and White]

Scans film with content such as text and line drawings in black and white.

[Black and White-Fine]

Imports the image with enhanced contrast for film with no density gradations.

[Black and White-Picture]

Best for photos and images that contain halftones. Error diffusion is used to simu-

late and reproduce halftones.

[Grayscale-4, 16, 256 level]

Imports the scanned image using multiple values. Used for situations where multi-

value data is required, such as processing of the scanned image on a PC.

Grayscale images can only be displayed if additional memory has been

installed in the scanner. Consult an authorized Canon service repre-

sentative for details.

Resolution

Sets the resolution used (in dots per inch (dpi)) when the image is scanned. Reso-

lutions of 200, 300, 400 or 600 can be selected.

IMPORTANT

Contents

Main Introduction Introduction Conventions Conventions Contents Page Chapter 1 Installing Scanning Utility 800 Before Installation Installing Scanning Utility 800 Login to Windows. Load the Setup disk into your CD-ROM drive. Page Page Page Basic Scanning Utility 800 Operations Startup and Exit Screen Descriptions File Menu The scanned image is displayed here. Page View Menu Page Menu Help Menu Page Page Chapter 2 Specifying the Scanner Settings Select [File][Scanner setting...], or click on the Toolbar. Select the desired settings screen and specify the required set- tings. Scanner Settings Page Page Detail Settings Page Page Add on Settings Page Page Page Page Gamma Curve Settings Assigning Function Keys Select a function key. Assign the function. Press the Set button to store the functions assigned to the func- tion keys. Chapter 3 Using the Scanner Scanning and Saving Images Scan Page Project the image on the scanner screen. Select [File]-[Scan page]. Select [File]-[Save Page As...] or click in the Toolbar. Specify the file name, type (format) and save destination, and then click [Save]. Print the scanned image. (P.46 Printing the Displayed Image) Scan Batch to File Select the [Separator] setting. (Only when an FS Controller III is used) None File Mark Batch Mark File/Batch Mark Scanning ends. Check the scanned images. Opening a Saved File Select [File]-[Open] or click in the Toolbar. Select a file and click [OK]. Check the scanned image. The [View] menu and Toolbar buttons can be used to check the image. Printing Images Scan Batch to Printer Project the image onto the scanner screen. Check [Printer setting...]. Select [File]-[Print Format]. Page Page Page Check the print settings and click [OK]. Other Operations Converter Mode Project an image onto the scanner screen. Click in the Toolbar. Specify the destination folder for the saved files and the file type, then click [OK]. Use the FS Controller III keyboard to perform the scan. File names for image files ReaderPrinter Emulation Mode Page Page Page When an Error Message is Displayed Page When the Scanned Image is Not Normal A B Index C D E F G H I M U V W