Canon 800II manual Time, For 4.28.30 pm, Date, For January 20, Arrows, Film Address

Chapter 2 Specifying the Scanner Settings

(Input)	(Add on result)
CANON[00001]	CANON 00001

<Time>

To add the time that the document was scanned, type “\TIME”.

The time is added as an 8-digit number (including colons) in the 24-hour clock for- mat, as shown in the examples below.

(For 4.28.30 pm)
(Input)	(Add on result)
\TIME	16:28:30

<Date>

To add the date that the document was scanned, type a combination of Y (year), M (month) and D (day) to give “\MDY”, “\DMY” or “\YMD”.

The date is added as a 10-digit number, as shown in the example below. Slashes are used as separators between the year, month and day.

(For January 20, 2000)

(Input)	(Add on result)
\YMD	2000/01/20

<Arrows>

To add an arrow, type one of the following:

(Input)	(Add on result)
\u	↑
\d	↓
\l	←
\r	→

<Film Address>

When the FS Controller III is used as the carrier, this option adds the film address of roll film detected by the FS Controller III.

To add the film address (batch, file and page), type “\A”.

The added address is enclosed in brackets ([ ]), with the batch, file and page ad- dresses added sequentially and separated by periods (.).Because batch, file and pages addresses can each contain up to 9 digits, the added address consists of up to 31 characters including the enclosing brackets and the separating periods.

2

Specifying the Scanner Settings

(Input)	(Add on result)
\A	[123456.789012.345]
	batch file	page

27