Chapter 2 Specifying the Scanner Settings
26
Add on Settings
The Add on function can be used to add any text or counter to a scanned image.
Use the Add on Settings dialog box to specify the text to be added by the Add on
function along with other related settings.
Text
Enter the information to be added.
Any of the following letters and symbols can be specified.
The maximum length for added text is 64 characters.
• Numbers (0 to 9)
• Letters (uppercase or lowercase)
• Spaces
• Symbols
The following symbols are added unchanged:
!”#$%&’()*+-./:;<=>?@^_|{}~‘
The \, [ , ] characters indicate that the next character is to be added on. Thus:
\\ ➝ \, \[ ➝ [, \] ➝ ].
In addition to these, counters, times, dates, arrows and film addresses can be speci-
fied as special characters.
<Counter>
To add on a counter, specify a number enclosed in brackets ([ ]).
The number inside the brackets is taken as the starting number for the counter and
the number of digits in the number is taken as the number of counter digits (up to 9
digits). (See the example below.)
The size of the timer increment and the timing of incrementing is set in “Counter
Settings” described below.