Canon 800II Check the scanned image.

Chapter 3 Using the Scanner

Check the scanned image.

The [View] menu and Toolbar buttons can be used to check the image.

Fit to width: Matches the image width to the width of the window.

Best Fit: Displays the entire page so that it fits in the window.

Zoom In: Enlarges the image each time it is clicked. Once the image is displayed at 100%

scale, this menu is grayed out and the image cannot be enlarged further.

Zoom Out: Reduces the image each time it is clicked.

Rotate Left: Rotates the image left (counterclockwise) by 90°.

Rotate Right: Rotates the image right (clockwise) by 90°.

Next page: Displays the image on the next page.

(if TIFF is selected as the file format and multiple pages are scanned)

Previous Page: Displays the image on the previous page.

(if TIFF is selected as the file format and multiple pages are scanned)

Contents

Main Introduction Introduction Conventions Conventions Contents Page Chapter 1 Installing Scanning Utility 800 Before Installation Installing Scanning Utility 800 Login to Windows. Load the Setup disk into your CD-ROM drive. Page Page Page Basic Scanning Utility 800 Operations Startup and Exit Screen Descriptions File Menu The scanned image is displayed here. Page View Menu Page Menu Help Menu Page Page Chapter 2 Specifying the Scanner Settings Select [File][Scanner setting...], or click on the Toolbar. Select the desired settings screen and specify the required set- tings. Scanner Settings Page Page Detail Settings Page Page Add on Settings Page Page Page Page Gamma Curve Settings Assigning Function Keys Select a function key. Assign the function. Press the Set button to store the functions assigned to the func- tion keys. Chapter 3 Using the Scanner Scanning and Saving Images Scan Page Project the image on the scanner screen. Select [File]-[Scan page]. Select [File]-[Save Page As...] or click in the Toolbar. Specify the file name, type (format) and save destination, and then click [Save]. Print the scanned image. (P.46 Printing the Displayed Image) Scan Batch to File Select the [Separator] setting. (Only when an FS Controller III is used) None File Mark Batch Mark File/Batch Mark Scanning ends. Check the scanned images. Opening a Saved File Select [File]-[Open] or click in the Toolbar. Select a file and click [OK]. Check the scanned image. The [View] menu and Toolbar buttons can be used to check the image. Printing Images Scan Batch to Printer Project the image onto the scanner screen. Check [Printer setting...]. Select [File]-[Print Format]. Page Page Page Check the print settings and click [OK]. Other Operations Converter Mode Project an image onto the scanner screen. Click in the Toolbar. Specify the destination folder for the saved files and the file type, then click [OK]. Use the FS Controller III keyboard to perform the scan. File names for image files ReaderPrinter Emulation Mode Page Page Page When an Error Message is Displayed Page When the Scanned Image is Not Normal A B Index C D E F G H I M U V W