] Correcting Red-Eye Effect

Manual Correction

When the camera cannot automatically detect and correct red-eye, correct it manually.

Add a correction frame.

●In Step 3 on p. 119, select [Add Frame] and then press the m button.

Set the position and size.

●Press the opqrbuttons to move the correction frame (green) to the red-eye section, move the zoom lever to adjust the frame size so that it surrounds only the red-eye section.

XThe area inside the frame will appear enlarged in the lower right of the screen.

●If you press the m button, the first frame (white) will be fixed, and a new correction frame will appear.

●You can add up to 35 correction frames.

●When you have set the frame positions and sizes, press the n button, then follow Steps 3 and 4 on p. 119.

Removing Frames

•To remove a frame, in Step 3 on p. 119, select [Remove Frame] and then press the m button.

•Press the qr buttons or turn the  dial to select a frame (green), then press the m button.

•When [Overwrite] in Step 4 on p. 119 is selected, the uncorrected image

is overwritten with the corrected data, erasing the original image.

•Some images may not be properly corrected.

•Repeatedly correcting the same image may cause the quality to deteriorate.

•Protected images cannot be overwritten.

120