Changing the Color and Shooting

You can change the look of an image when shooting. However, depending on the scene, the image may become rough, or the colors may not come out as expected. We recommend saving the original image as well as the new one (p. 89).

T Color Accent

You can take shots where only a single chosen color from within the screen remains, and the rest of the shot changes to black and white.

Select T.

●Set the mode switch to K, turn the  dial and select T.

Press the lbutton.

●The unchanged image, and the Color Accent image will both display.

●The color for default settings is green.

Indicate the color.

●Position the center frame so it is filled with the the color you want, and press the qbutton.

XThe color indicated will be recorded.

 

 

Indicated the area to be colored.

 

 

● Press the opbuttons or turn the Âdial,

Recorded color

and change the area you want to color.

 

 

● When you want only the color that you

 

 

have chosen to remain, increase the value

 

 

of -. When you want to colors to remain

 

 

that are close to the color you have

 

 

chosen, increase the value of +.

 

 

● Pressing the lbutton will make the

 

 

setting, and will return to the shooting screen.

• Using the flash may cause the image to come out different than expected.

•Even if you turn off the power, the recorded color will be saved.

87