Sony DAV-HDX686W manual Setting up the Wireless System, 1 2 3, Getting Started

Press "/1 on the unit. The system turns on.

Set the SURROUND SELECTOR switch of the surround amplifier to

SURROUND.

Set the S-AIR ID switch of the surround amplifier to A.

Getting Started

Step 3: Setting up the Wireless System

To use the wireless system, you need to set up the surround amplifier. Before setting, make sure that the wireless transceivers are inserted into the unit and the surround amplifier correctly (page 31).

This wireless system is called “S-AIR.” For details of the S-AIR function, see “Using an S-AIR Product” (page 73).

"/1

POWER / ON LINE

Indicator

POWER	S-AIR ID switch
	EZW-RT10
POWER
	S-AIR ID SPEAKER
POWER/ON LINE	A
	B
	C
	L
	PAIRING

PHONES SURROUND SELECTOR R

PHONES jack	SURROUND
	SELECTOR switch

The unit transmits sound to the surround amplifier that is connected to the surround speakers. To establish sound transmission, perform the following Steps.

1

2

3

4 Press POWER on the surround amplifier.

The POWER / ON LINE indicator turns green. If it doesn’t, check the transmission status as follows.

To check the transmission status

You can check the status of sound transmission between the unit and surround amplifier by observing the POWER / ON LINE indicator of the surround amplifier.

POWER / ON LINE	Status
indicator
Turns green.	Sound transmission is
	established.
Flashes green.	Sound transmission is not
	established.
Turns red.	The surround amplifier does
	not output sound.
Turns off.	The surround amplifier turns
	off or its protection is active.

For details of the surround amplifier, see “Surround amplifier operation” (page 97).

To enjoy sound by using headphones

You can enjoy the system’s sound by connecting the headphones to the PHONES jack on the surround amplifier.

Note

•The volume of the unit may become minimum if you turn off the surround amplifier while the headphones are connected to the surround amplifier, or radio reception is poor. In this case, “HP NO LINK” and “VOLUME MIN” appear alternately in the front panel display. Check radio reception, and set the volume again.

When you use multiple S-AIR products

See “Establishing sound transmission between the unit and S-AIR sub unit (ID setting)” (page 74).

34US