Sony DAV-HDX686W 1 2 3 4, Changing the RF output power, Press X/x to select the desired setting

–If “RF CHANGE” is set to “OFF,” transmission between the unit and S-AIR sub unit can be performed using one of the following channels.

–S-AIR ID A: equivalent channel for IEEE 802.11b/g channel 1

–S-AIR ID B: equivalent channel for IEEE 802.11b/g channel 6

–S-AIR ID C: equivalent channel for IEEE 802.11b/g channel 11

•The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s).

Changing the RF output power

(Only when using the EZW-RT10A wireless transceiver.)

1

2

3

4

5

Press SYSTEM MENU.

Press X/x repeatedly until “RF

POWER” appears in the front panel display, then press or c.

Press X/x to select the desired setting.

•“HIGH”: Normally select this.

•“LOW”: The RF output power is decreased.

Press .

The setting is made.

Press SYSTEM MENU.

The system menu turns off.

78US