Sony DAV-HDX686W manual Performing the Quick Setup, To attach the cover to the surround amplifier

Turn on the TV.

To attach the cover to the surround amplifier

After connecting and setting, you can attach the cover to the surround amplifier for organizing and storing excess speaker cords.

1 Attach the speaker cord cover by sliding it down along the grooves at the edges of the surround amplifier.

Speaker cord cover

Surround amplifier

Grooves

Push the speaker cord cover down until you hear a click. Turn the surround amplifier upside down, then store the cords in the speaker cord cover.

2 Insert the tabs of the speaker cord holder in the slots of the speaker cord cover, and press it into place.

Speaker cord holder

Surround amplifier

m

Step 4: Performing the Quick Setup

Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the area.

"/1

C/X/x/c,

DISPLAY

1

2 Press [/1 on the unit, and POWER on the surround amplifier.

Note

•Make sure that the function is set to “DVD” (page 39).

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 37).

4 Press without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

Getting Started

35US