Sony DAV-HDX686W manual 96US, The S-AIRfunction

SymptomRemedy

No sound is output from the system and TV while using the System Audio Control function.

•Set [AUDIO (HDMI)] in [HDMI SETUP] to [ON] (page 63).

•Make sure that the connected TV is compatible with the System Audio Control function.

•For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 70).

The S-AIR function

Symptom	Remedy
S-AIR connection is not	• If you use another S-AIR main unit, place it more than 8 m (about 25 feet) away
established (sound transmission	from the S-AIR main unit you are using.
is not established), e.g., the	• Confirm the S-AIR IDs of the unit and S-AIR sub unit (page 74).
indicator of the S-AIR sub unit	• Another S-AIR sub unit is paired to the S-AIR main unit. Pair the desired S-AIR
does the following:	sub unit with the S-AIR main unit (page 76).
• Turns off.	• Place so that the S-AIR main unit and S-AIR sub unit are separated from other
• Flashes.	wireless devices.
• Turns red.	• Avoid using any other wireless devices.
	• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
	connected and turn on the S-AIR sub unit.
No sound is heard from the	• If you use another S-AIR main unit, place it more than 8 m (about 25 feet) away
S-AIR sub unit.	from the S-AIR main unit you are using.
	• Confirm the S-AIR IDs of the unit and S-AIR sub unit (page 74).
	• Confirm the pairing setting (page 76).
	• Place so that the S-AIR main unit and S-AIR sub unit closer together.
	• Avoid use of equipment that generates electromagnetic energy, such as a
	microwave oven.
	• Place so that the S-AIR main unit and S-AIR sub unit are separated from other
	wireless devices.
	• Avoid using any other wireless devices.
	• Change the “RF CHANGE” setting (page 77).
	• Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit.
	• Turn off the system and S-AIR sub unit, then turn on them.

There is noise or the sound skips. • If you use another S-AIR main unit, place it more than 8 m (about 25 feet) away from the S-AIR main unit you are using.

•Place so that the S-AIR main unit and S-AIR sub unit closer together.

•Avoid use of equipment that generates electromagnetic energy, such as a microwave oven.

•Place so that the S-AIR main unit and S-AIR sub unit are separated from other wireless devices.

•Avoid using any other wireless devices.

•Change the “RF CHANGE” setting (page 77).

•Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit.

96US