Sony DAV-HDX686W ID setting, To set the ID of the unit, To set the ID of the surround amplifier

Establishing sound transmission between the unit and S-AIR sub unit

(ID setting)

For the surround amplifier

For the S-AIR receiver

Simply by matching the ID of the unit and the S-AIR sub unit, you can establish sound transmission.

To set the ID of the unit

1 Press "/1 on the unit.

The system turns on.

2 Press SYSTEM MENU.

3 Press X/x repeatedly until “S-AIR ID” appears in the front panel display, then press or c.

4 Press X/x to select the desired ID.

You can select any ID (A, B, or C).

5 Press .

The setting is made.

6 Press SYSTEM MENU.

The system menu turns off.

7 Set the S-AIR sub unit to the same ID.

Sound transmission is established as follows (example):

S-AIR main unit
(This unit)
	ID A
ID A	ID A
S-AIR sub unit	S-AIR sub unit
Tip

•To confirm the current ID, perform Steps 1 to 3 above. When you pair the unit with the S-AIR sub

unit (page 76), “(PAIRING)” appears beside ID in the front panel display.

To set the ID of the surround amplifier

1 Make sure that the SURROUND SELECTOR switch of the surround amplifier is set to SURROUND.

2 Set the S-AIR ID switch of the surround amplifier to match the ID (A, B, or C) of the unit.

3 Press POWER on the surround amplifier.

When sound transmission is established, the POWER / ON LINE indicator of the surround amplifier turns green.

For details of the POWER / ON LINE indicator, see “To check the transmission status” (page 34).

To set the ID of the S-AIR receiver

Refer to the operating instructions of the S-AIR receiver.

To use multiple S-AIR main units

You can use multiple S-AIR main units by setting a different ID for each component.

S-AIR main unit		Other S-AIR
(This unit)
		main unit
ID A		ID B
ID A	ID A	ID B
S-AIR sub unit	S-AIR	S-AIR sub unit
	sub unit

74US