Choosing Images Individually
1 Choose [Select].
●●Following step 2 in “Using the Menu” (=82), choose [Select] and press the [
] button.
2 Choose an image.
●●Press the [ ][ ] buttons to choose an image, and then press the [
] button. [
] is displayed.
●●To cancel selection, press the [
] button again. [
] is no longer displayed.
●●Repeat this process to specify other images.
3 Protect the image.
●●Press the [
] button. A confirmation message is displayed.
●●Press the [ ][ ] buttons to choose [OK], and then press the [
] button.
●● Images will not be protected if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3.
Selecting a Range
1 Choose [Select Range].
●●Following step 2 in “Using the Menu” (=82), choose [Select Range] and press the [
] button.
2 Choose a starting image.
●●Press the [
] button.
●●Press the [ ][ ] buttons to choose an image, and then press the [
] button.
3 Choose an ending image.
●●Press the [ ] button to choose [Last image], and then press the [
] button.
●●Press the [ ][ ] buttons to choose an image, and then press the [
] button.
●●Images before the first image cannot be selected as the last image.
Before Use
Basic Guide
Advanced Guide
1 | Camera Basics |
|
|
2 | Auto Mode / |
Hybrid Auto Mode | |
|
|
3 | Other Shooting Modes |
|
|
4 | P Mode |
|
|
5 | Tv, Av, and M Mode |
|
|
6 | Playback Mode |
|
|
7 | Setting Menu |
|
|
8 | Accessories |
|
|
9 | Appendix |
Index
83