Canon 9544B001 38

●● A face may not be displayed at a constant size at some zoom factors, or if the subject’s head is tilted or facing the camera indirectly.

●● During movie recording, a changed zoom factor and camera operating sounds are recorded.

●● When Auto is on, some shooting information is not displayed, and some shooting settings cannot be configured.

●● If the person whose face is framed with [] moves toward the edge of the screen, the camera zooms out to keep the person in view.

●● In step 3, switching [] to another face with the [] button is not possible during movie recording.

●● The zoom factor remains the same after you press the shutter button all the way down in self-timer mode (=39), even if the person’s size relative to the screen changes.

●● The face size can also be adjusted in MENU (=27) > [] tab > [Auto Settings] > [Auto Zoom]. You can choose [Off] to deactivate this feature and use only the feature described in “Easily Reacquiring Subjects with Auto Zooming (Seek Assist)”.

●● You can zoom in or out with the zoom lever when [Face], [Upper Body], or [Whole Body] is selected, but the original zoom factor will be restored in a few seconds after you release the lever.

●● You can clear your specified face size during movie recording by pressing the [] button.

●● Face sizes cannot be changed during movie recording.

Easily Reacquiring Subjects with Auto Zooming (Seek Assist)

 Still Images  Movies

If you lose track of a subject while zoomed in and move the camera to look for it, the camera detects this movement and automatically zooms out, which makes it easier to find the subject.

1 Enter Auto mode (=37). 2 Look for the lost subject.