Red-Eye Correction

 Still Images   Movies

Red-eye that occurs in flash photography can be automatically corrected as follows.

1 Access the [Flash Settings] screen.

●●Press the [] button, choose [Flash Settings] on the [] tab, and then press the [] button (=27).

2 Configure the setting.

●●Choose [Red-Eye Corr.], and then choose [On] (=27).

●●Once the setting is complete, [] is displayed.

●●To restore the original setting, repeat this process but choose [Off].

●● Red-eye correction may be applied to image areas other than eyes (if the camera misinterprets red eye makeup as red pupils, for example).

●●

You can also correct existing images (=91).

 

●●

You can also access the screen in step 2 when the flash is up by

 

pressing the [ ] button and immediately pressing the [

]

 

button.

 

 

 

 

Changing Movie Image Quality

 Still Images   Movies

3 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see “Recording Time per Memory Card” (= 135).

●●Press the [] button, choose [] in the menu, and choose the desired option (=26).

●●The option you configured is now displayed.

●●To restore the original setting, repeat this process but choose [].

Image

Resolution

Frame Rate

Details

Quality

 

 

 

 

1920 x 1080

30 fps

For shooting in Full HD

 

 

 

 

 

1280 x 720

30 fps

For shooting in HD

 

 

 

 

 

640 x 480

30 fps

For shooting in standard

 

definition

 

 

 

●● In [] and [] modes, black bars displayed on the top and bottom edges of the screen indicate image areas not recorded.

Before Use

Basic Guide

Advanced Guide

1

Camera Basics

 

 

2

Auto Mode /

Hybrid Auto Mode

 

 

3

Other Shooting Modes

 

 

4

P Mode

 

 

5

Tv, Av, and M Mode

 

 

6

Playback Mode

 

 

7

Setting Menu

 

 

8

Accessories

 

 

9

Appendix

Index

43