●● After you set the shutter speed or aperture value, the exposure level may change if you adjust the zoom or recompose the shot.
●● Screen brightness may change depending on your specified shutter speed or aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [
].
●● To have the setting you did not configure in step 2 (whether shutter speed or aperture value) automatically adjusted to obtain standard exposure, hold the shutter button halfway and press the [
] button. Note that standard exposure may not be possible with some settings.
●● With shutter speeds of 1.3 seconds or slower, ISO speed is [
] and cannot be changed.
●● | [ ]: Manual |
●● | Calculation of standard exposure is based on the specified |
| metering method (=59). |
|
|
Adjusting the Flash Output
Still Images 
Movies
Choose from the three flash levels in [
] mode.
1 Enter [
] mode.
●●Set the mode dial to [
].
2 Configure the setting.
●●Raise the flash, press the [ ] button and
immediately turn the [
] dial to choose the flash level, and then press the [
] button.
●●Once the setting is complete, [ ] is displayed.
●● You can also set the flash level by accessing MENU (=27) and choosing [
] tab > [Flash Settings] > [Flash Output].
●● You can set the flash level in [
] or [
] mode by accessing MENU (=27) and choosing [
] tab > [Flash Settings] > [Flash Mode] > [Manual].
●● You can also access the [Flash Settings] MENU screen (=27) when the flash is up by pressing the [
] button and immediately
pressing the [
] button.
Before Use
Basic Guide
Advanced Guide
1 | Camera Basics |
|
|
2 | Auto Mode / |
Hybrid Auto Mode | |
|
|
3 | Other Shooting Modes |
|
|
4 | P Mode |
|
|
5 | Tv, Av, and M Mode |
|
|
6 | Playback Mode |
|
|
7 | Setting Menu |
|
|
8 | Accessories |
|
|
9 | Appendix |
Index
73