Canon 9546B001 Changing the Focus Setting, Choosing a Person to Focus On (Face Select)

Shooting with Servo AF

 Still Images  Movies

This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway.

1 Configure the setting.

	zzPress the [	] button, choose [Servo
	AF] on the [ ] tab, and then choose [On]
	(=30).
	2 Focus.
	zzThe focus and exposure are maintained
	where the blue AF frame is displayed
	while you are pressing the shutter button
	halfway.

●●	Focusing may not be possible in some shooting conditions.
●●	In low-light conditions, Servo AF may not be activated (AF frames
	may not turn blue) when you press the shutter button halfway.
	In this case, the focus and exposure are set according to the
	specified AF frame mode.
●●	If adequate exposure cannot be obtained, shutter speeds and
	aperture values are displayed in orange. Release the shutter
	button, and then press it halfway again.
●●	AF lock shooting is not available.
●●	[AF-Point Zoom] on the [ ] tab (=30) is not available.
●●	Not available when using the self-timer (=41).

Changing the Focus Setting

 Still Images  Movies

You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed. Instead, you can limit camera focusing to the moment you press the shutter button halfway.

zzPress the [] button, choose [Continuous AF] on the [] tab, and then choose [Off] (=30).

		Helps avoid missing sudden photo opportunities, because
	On	the camera constantly focuses on subjects until you press the
		shutter button halfway.
	Off	Conserves battery power, because the camera does not focus
	Off	constantly.
		constantly.