Playback on a
Still Images Movies
Connecting the camera to a TV with the Stereo AV Cable
1 Make sure the camera and TV are off.
2 Connect the camera to the TV.
zzOn the TV, insert the cable plugs fully into the video inputs as shown.
zzMake sure the cable plugs are in video inputs of the same color.
zzOn the camera, open the terminal cover and insert the cable plug fully into the camera terminal.
3 Display images.
zzFollow steps 3 – 4 in “Playback on a
●● Correct display is not possible unless the camera video output format (NTSC or PAL) matches the TV format. To change the
video output format, press the [] button and choose [Video System] on the [] tab.
●●
●● When the camera and TV are connected, you can also shoot while previewing shots on the larger screen of the TV. To shoot, follow the same steps as when using the camera screen. However,
Still Images Movies
Powering the camera with AC Adapter Kit
| 1 | Make sure the camera is off. | |
(2) | 2 | Open the cover. | |
zzFollow step 1 in “Inserting the Battery | |||
| |||
(1) |
| Pack and Memory Card” (=19) to | |
| open the memory card/battery cover, and | ||
|
| then open the coupler cable port cover |
as shown.
3 Insert the coupler.
zzHolding the coupler with the terminals (1) facing as shown, insert the coupler just as you would a battery pack (following
(1)step 2 in “Inserting the Battery Pack and Memory Card” (=19)).
zzMake sure the coupler cable passes through the port (1).
(1)
Before Use
Basic Guide
Advanced Guide
1Camera Basics
2Auto Mode / Hybrid Auto Mode
3Other Shooting Modes
4P Mode
5Tv, Av, M, and C Mode
6Playback Mode
7
8Setting Menu
9Accessories
10Appendix
Index
162