Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates the screen (Display Off) and then turns itself off after a specific period of inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity. In about two more minutes, the lens is retracted and the camera turns itself off. To activate the screen and prepare for shooting when
the screen is off but the lens is still out, press the shutter button halfway (=27).
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of inactivity.
●● You can deactivate Auto Power Down and adjust the timing of Display Off, if you prefer (=153).
●● Power saving is not active while the camera is connected to other devices via
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter button halfway down, and once the subject is in focus, press the button all the way down to shoot.
In this manual, shutter button operations are described as pressing the button halfway or all the way down.
1 Press halfway. (Press lightly to focus.)
zzPress the shutter button halfway. The camera beeps twice, and AF frames are displayed around image areas in focus.
2 Press all the way down. (From the halfway position, press fully to shoot.)
zzThe camera shoots, as a shutter sound is played.
zzKeep the camera still until the shutter sound ends.
●● Images may be out of focus if you shoot without initially pressing the shutter button halfway.
●● Length of shutter sound playback varies depending on the time required for the shot. It may take longer in some shooting scenes, and images will be blurry if you move the camera (or the subject moves) before the shutter sound ends.
Before Use
Basic Guide
Advanced Guide
1Camera Basics
2Auto Mode / Hybrid Auto Mode
3Other Shooting Modes
4P Mode
5Tv, Av, M, and C Mode
6Playback Mode
7
8Setting Menu
9Accessories
10Appendix
Index
27