Display Language
Change the display language as needed.
1 Enter Playback mode.
zzPress the [
] button.
2 Access the setting screen.
zzPress and hold the [
] button, and then
immediately press the [
] button.
3 Set the display language.
zzPress the [
][
][ ][ ] buttons or turn the [
] dial to choose a language, and then press the [
] button.
zzOnce the display language has been set, the setting screen is no longer displayed.
●● The current time is displayed if you wait too long in step 2 after
pressing the [
] button before you press the [
] button. In this case, press the [
] button to dismiss the time display and repeat step 2.
●● You can also change the display language by pressing the
[
] button and choosing [Language 
] on the [
] tab.
●● You can also set the display language by touching a language on the screen in step 3 and then touching it again.
Trying the Camera Out
Still Images 
Movies
Follow these instructions to turn the camera on, shoot still images or movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
1 Turn the camera on.
zzPress the power button.
zzThe startup screen is displayed.
2 Enter [
] mode.
zzSet the mode dial to [
].
zzAim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
zzIcons representing the scene and image stabilization mode are displayed in the upper left of the screen.
zzFrames displayed around any detected subjects indicate that they are in focus.
3 Compose the shot.
zzTo zoom in and enlarge the subject, move the zoom lever toward [
] (telephoto), and to zoom away from the subject, move it toward [
] (wide angle).
Before Use
Basic Guide
Advanced Guide
1Camera Basics
2Auto Mode / Hybrid Auto Mode
3Other Shooting Modes
4P Mode
5Tv, Av, M, and C Mode
6Playback Mode
7
8Setting Menu
9Accessories
10Appendix
Index
22