Flash

Changing the Flash Mode

 Still Images   Movies

You can change the flash mode to match the shooting scene. For details on the flash range, see “Flash Range” (= 196).

1 Raise the flash.

zzMove the [] switch.

2 Configure the setting.

zzPress the [ ] button, choose a flash mode (either press the [ ][ ] buttons or turn the [] dial), and then press the [] button.

zzThe option you configured is now displayed.

●● The setting screen cannot be accessed by pressing the [] button when the flash is lowered. Move the [] switch to raise the flash, then configure the setting.

Auto

Fires automatically in low-light conditions.

On

Fires for each shot.

Slow Synchro

Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range.

●● In [] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (=91).

●● In [] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing.

Off

For shooting without the flash.

●● If a blinking [] icon is displayed when you press the shutter button halfway in camera-shake inducing, low-light conditions, mount the camera on a tripod or take other measures to keep it still.

●● Adjustment is also possible by pressing the [] button, touching the desired option, and then touching it again.

Before Use

Basic Guide

Advanced Guide

1Camera Basics

2Auto Mode / Hybrid Auto Mode

3Other Shooting Modes

4P Mode

5Tv, Av, M, and C Mode

6Playback Mode

7Wi-Fi Functions

8Setting Menu

9Accessories

10Appendix

Index

88