OSD MENU 4
Display Setup
DISPLAY SETUP
CAMERA ID | ON |
PTZ INFORMATION | AUTO |
ACTION TITLE | AUTO |
PRESET LABEL | AUTO |
ALARM I/O | AUTO |
<SET NORTH DIRECTION> <PRIVACY ZONE>
BACK
EXIT
Display setup allows you to program how labels are displayed on the monitor. In case of AUTO, the labels are displayed on the monitor when there are any changes in parameters.
zCamera ID [ON/OFF]
Displays the selected Camera ID (Address).
zPTZInformation [ON/OFF/AUTO]
Displays the amount of pan from zero degree vertical, the amount of tilt from zero degree horizontal and current compass direction. Also identifies the amount of the zoom magnification.
zActionTitle [ON/OFF/AUTO]
Identfies Actions. "SET PRESET xxx" "PRESET xxx"
"PATTERN x" "SWG/PRESET xxx"
"UNDEFINED"
zPreset Label [ON/OFF/AUTO]
Displays the preset labels when the camera arrives at presets.
zAlarm I/O [ON/OFF/AUTO]
Displays the activated alarms. This information shows the current state of Alarm Inputs and Relay Outputs. If an Input point is ON state, it will show a number corresponding to each point. If an Input point is OFF state,
Example) The point 2 & 3 of inputs are ON and Output is ON, OSD will show as below.
37X Speed Dome Camera | 26/50 |