OSD MENU 4
Preset Setup
PRESET | SETUP |
|
PRESET NO. | 1 | |
CLR PRESET | CANCEL | |
<EDIT | SCENE> |
|
<EDIT | LABEL> | LABEL123 |
RELAY | OUT | OFF |
CAM ADJUST | GLOBAL |
zPreset | [1~128] |
Number | Selects a preset number to set up. If a |
| selected preset is already defined, the |
| camera moves to the |
| and preset parameters such as Label and |
| CAM Adjust show on the monitor. If a |
| selected preset is not defined, |
| “UNDEFINED” shows on the monitor. |
BACK |
EXIT |
zClear Preset
zEdit
Preset Scene
zEdit
Preset Label
[CANCEL/OK]
Deletes the data of the selected Preset.
Edits the label of the selected Preset to show on the monitor when the preset runs. MAX. 10 alphanuberic characteristics are allowed.
zRelay Out | Defines the relay output. |
zCAMAdjust | [GLOBAL/LOCAL] |
| WB(White Balance) and AE(Auto |
| Exposure) can be set up independently for |
| each preset. There are 2 modes, "Global" |
| mode & "Local" mode. The Global mode is |
| that WB and/or AE are/is set up totally and |
| simultaneously for all presets. The Global |
| parameter setup such as WB and AE can |
| be done in "ZOOM CAMERA SETUP" menu. |
| The Local mode is that WB and/or AE |
| are/is set up independently or separately |
| for each preset. The Local parameter setup |
| for WB and AE can be done in each preset |
| setup menu. Each Local parameter such as |
| WB and AE activates correspondingly |
| when the camera arrives at each preset |
| position. During jog operation, Global |
| WB/AE value should be applied. All Local |
| WB/AE values do not change although |
| Global WB/AE value changes. The Local |
| mode has the prior to the Global mode. |
37X Speed Dome Camera | 37/50 |