| INTRODUCTION 1 |
Main Part Description |
|
| Mounting Screw Hole |
| Drop Prevention Spring |
DIP Switch | Reset Switch (IP Model) |
LAN Port (IP Model) | |
| Audio Port (IP Model) |
| Main Connector |
| Sensor I/O Port (I/O Model) |
| Dome Cover |
zDomeCover | Do not detach the protection vinyl from the dome cover before |
| finishing all the installation process to protect the dome cover from |
| scratches or dust. |
zDIP Switch
zDrop Prevention Spring
Used to set up camera IDs and protocols.
This part keeps the camera from dropping during installation and maintenance. After install the Bracket, please, hang the spring to the drop prevention hook of main body as shown in picture for further tasks.
zMounting Screw Hole | Used to assemble the main body with a bracket with screws. |
zMain Connector | Used for the power wire, the video cable and the |
| communication cable connection. |
zSensorI/O Port | Used for the sensor in/out connection. (The sensor I/O function |
| possible models only) |
zLAN Port | Used for the Ethernet connection. (IP addressable models only) |
zAudio Port | Used for the audio in/out connection. (IP addressable models |
| only) |
zReset Switch | Used to initialize all the network configurations to the factory |
| default. (IP addressable models only) Press the button for more |
| than 5 seconds to initialize the network system. |
|
|
37X Speed Dome Camera | 10/50 |