OSD MENU 4
Swing Setup
SWING SETUP |
|
SWING NO. | 1 |
1ST POS. | NOT USED |
2ND POS. | NOT USED |
SWING SPEED | 30/SEC |
CLEAR SWING | CANCEL |
RUN SWING |
|
BACK |
|
EXIT |
|
zSwing | [1~8] |
|
|
Number | Selects a Swing number to edit. If the | ||
| selected Swing is not defined, "NOT USED" | ||
| is displayed in the 1st Position and the 2nd | ||
| Position. |
| |
z1st Position | [PRESET 1~128] |
| |
2nd Position | Sets the 2 positions for a Swing function. If | ||
| the selected preset is not defined, | ||
| "UNDEFINED" is displayed as shown | ||
| below. |
| |
| SWING SETUP |
| |
| |||
| SWING NO. | 1 | |
| 1ST POS. | PRESET5 | |
| 2ND POS. | NOT USED | |
|
|
| UNDEFINED |
|
|
| |
| When a swing function runs, the camera | ||
| moves from the preset assigned as the 1st | ||
| point to the preset assigned as the 2nd | ||
| point in CW(Clockwise) direction. Then | ||
| the camera moves from the preset | ||
| assigned as the 2nd point to the preset | ||
| assigned as the 1st point in CCW | ||
| (Counterclockwise) direction. In case that | ||
| the preset assigned as the 1st point and the | ||
| preset assigned as the 2nd point are same | ||
| or only 1 Preset position is assigned, the | ||
| camera turns on its axis by 360° in CW | ||
| direction and then it turns on its axis by | ||
| 360° in CCW direction. | ||
zSwing | [1°/sec. ~180°/sec.] |
| |
Speed | Defines Swing speed between the 2 Preset | ||
| positions from 1°/sec to 180°/sec |
zClearSwing [CANCEL/OK]
| Deletes the data of the selected Swing. |
zRun Swing | Runs Swing for the test purposes to check |
| if it works properly. |
37X Speed Dome Camera | 39/50 |