OSD MENU 4
Preset Scene Setup
EDIT SCENE - PRESET 1
MOVE TO TARGET POSITION [NEAR:SAVE /FAR:CANCEL]
Preset Label Setup
EDIT LABEL - PRESET 1
[]
1234567890 OK
ABCDEFGHIJ CANCEL KLMNOPQRST UVWXYZabcd efghijklmn opqrstuvwx
○1 Use the Joystick to move the camera to a desired position.
○2 Save the preset position by pressing NEAR key.
○3 Press FAR key to cancel targeting the preset position.
Edit the label of the selected preset to show on the monitor when camera arrives at the preset. In the Edit Label menu, the dark rectangular is the cursor. As soon as finishing selecting an alphabet or a number, the cursor moves to the next digit.
[]
Current Cursor Position
①With Left/Right/Up/Down of the joystick, move to a desired Alphabet or a desired number in the Alphanumeric set. To select a desired Alphabet or a desired number, press the NEAR key.
1234567890 ABCDEFGHIJ KLMNOPQRST UVWXYZabcd efghijklmn opqrstuvwx
Space Char. Back Space Char.
If you want to use a blank, select the double quotation mark (" "). If you want to delete an Alphabet or a number, use the back space character (" ←").
②If you complete the Label editing, move the cursor to "OK" and press the NEAR key to save the completed label. To abort the current change, move the cursor to "Cancel" and press the NEAR key.
37X Speed Dome Camera | 38/50 |