OPERATION 3
OSD Display
Preset Label |
| LABEL12345 | PRESET1 |
| Action Title |
| |||||
|
|
Camera ID |
|
|
|
|
| Alarm Information | ||
|
|
|
| |||||
| CAM 1 |
| 15/4/x1/N |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| P/T/Z Information |
| |||
z P/T/ZInformation | Displays the amount of pan from zero degree vertical, the amount of | |||||||
| tilt from zero degree horizontal and current compass direction. Also | |||||||
| identifies the amount of the zoom magnification. | |||||||
z Camera ID | Displays the selected Camera ID (Address). |
| ||||||
z ActionTitle | Identfies Actions |
|
|
|
|
| ||
| "SET PRESET xxx" | When Preset xxx is memorized. | ||||||
| "PRESETxxx" | When the camera reaches Preset xxx. | ||||||
| "PATTERN x" | When Pattern x is in action. | ||||||
| "SWG⋅/PRESETxxx" | When Swing x is in action. Displays both of Swing | ||||||
|
|
|
| number and Preset number. | ||||
| "UNDEFINED" | When a undefined function is called to run | ||||||
z Preset Label | Displays preset labels when the camera arrives at presets. |
zAlarm Information Displays activated alarms. This information shows current state of Alarm Inputs and Relay Outputs. If an Input point is ON state, it will show a number corresponding to each point. If an Input point is OFF state,
Example) The point 2 & 3 of inputs are ON and Output is ON, OSD will show as below.
37X Speed Dome Camera | 24/50 |