INSTALLATION 2
Installation with Wall Mount Bracket
①Make a hole whose diameter is 30~40mm on the mounting surface to pass the wire(s) and cable(s) through the mounting surface. (In case of the wiring and cabling through the mounting surface only) Then prepare the wall mount bracket. Pull the wire(s) and cable(s) for the system as below. Attach the wall mount bracket to the mounting surface. (Hex Lag #14⋅50)
②Hook up “Drop Prevention Spring” on main body to prevent camera from unexpected drop and pull the wire(s) and cable(s) for the system as below.
③Line up the mold lines and assemble main body to mount adaptor and turn it. And assemble the main both with the camera mount adaptor with the 3 screws. (Machine M5⋅15).
④Screw the dome cover to the main body and remove the protection vinyl from the dome cover.
ImportantNotice
zBefore startingthe installation, make surethat theCamera ID and Protocolare set up properly.
37X Speed Dome Camera | 14/50 |
