Speco Technologies SIPSD37X, HTSD37X specifications Group, Other Functions, Operation

Models: HTSD37X SIPSD37X

1 50
Download 50 pages 22.85 Kb
Page 22
Image 22
Group

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPERATION 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Group

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

z

Function

This function is that the camera memorizes the combination of

 

 

 

 

 

 

 

Presets, Pattern and/or Swings sequently and runs Presets, Pattern

 

 

 

 

 

 

 

and/or Swings repetitively. MAX. 8 sets of Group are programmable.

 

 

 

 

 

 

 

Each group can have MAX. 20 actions which are the combination of

 

 

 

 

 

 

 

Preset, Pattern and Swing. Preset speed can be set up and the repeat

 

 

 

 

 

 

 

number of Pattern & Swing can be set up in Group setup. Dwell time

 

 

 

 

 

 

 

between actions can be set up also.

 

 

 

 

 

 

 

 

 

 

 

 

Dwell Time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Preset 1

 

 

Pattern 1

Swing 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Max 20 Entities

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

z

Setting Groups

To set Groups, enter into OSD menu.

 

 

 

 

 

 

z

Running Groups

Method1)<RunPattern>[GroupNO. +20]

ex) Run Group 7 : <Run Pattern>

 

 

 

 

 

 

 

Method2)<GoPreset>[GroupNO. +150]

[27]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ex)RunGroup7 : <GoPreset>[157]

 

 

z

Deleting Groups

To delete Groups, enter into OSD menu.

 

 

 

 

 

 

Other Functions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

z PowerUpAction

This setting defines a specific activity (Preset, Pattern, Swing and

 

 

 

 

 

 

 

Group) to be performed in the event that the power to the camera is

 

 

 

 

 

 

 

cycled. This function enables the user to resume, after turning on

 

 

 

 

 

 

 

power, the last action being executed before turning off the power.

 

 

 

 

 

 

 

Most of actions such as Preset, Pattern, Swing and Group are

 

 

 

 

 

 

 

available for this function but Jog actions are not available to resume.

 

 

z AutoFlip

In case that tilt angle arrives at the top of tilt orbit(90°), zoom module

 

 

 

 

 

 

 

camera turns on its axis by 180° at the top of tilt orbit and moves to

 

 

 

 

 

 

 

opposite tilt direction (180°) to keep tracing targets.

 

 

z Parking Action

This feature allows the camera to begin a specified operation after a

 

 

 

 

 

 

 

programmed time of inactivity. This function makes the camera

 

 

 

 

 

 

 

automatically run a pre-defined action if there is no command from

controller for a pre-defined time period. “Wait Time” means how long a camera should wait for from the previous-last (most recent) command before running the pre-defined action. It can be set to 1 second ~ 3 hours.

37X Speed Dome Camera

22/50

Page 22
Image 22
Speco Technologies SIPSD37X, HTSD37X specifications Group, Other Functions, Operation