Speco Technologies SIPSD37X, HTSD37X specifications Motion Setup, Inverse/Normal

OSD MENU 4

Motion Setup

MOTION SETUP

------------------------

MOTION LOCK	OFF
PWR UP ACTION	ON
AUTO FLIP	ON
JOG MAX SPEED	120/SEC
JOG DIRECTION	INVERSE
FRZ IN PRESET	OFF

<PARKING ACTION SETUP> <ALARM INPUT SETUP> BACK

EXIT

Sets the general functions of Pan/Tilt motions.

zMotion	[ON/OFF]
Lock	If Motion Lock is set to ON, it is impossible to
	set up and delete Preset, Swing, Pattern and
	Group. It is possible only to run those
	functions. To set up and delete those functions,
	enter into OSD menu.

zPowerUp [ON/OFF]

Action Refer to “Other Functions" section.

zAuto Flip [ON/OFF]

Refer to “Other Functions" section.

zJog Max	[1°/sec ~360°/sec]
Speed	Sets the maximum jog speed. Jog speed is
	inversely proportional to the zoom
	magnifications. As the zoom magnification
	goes up, the pan/tilt speed goes down.
zJog	[INVERSE/NORMAL]
Direction	Sets the Jog Direction. If this is set to
	‘Inverse’, the view direction in the screen is
	same as the direction of joystick. If this is set
	to ‘Normal’, the view direction in the
	screen is the reverse dirction of joystick.
zFreeze	[ON/OFF]
in Preset	Sets Frame Freeze Function. This feature
	freezes the scene on the monitor when going
	to a preset. At the start point of a preset
	movement, a camera starts freezing the image
	of the start point. Camera keeps displaying
	the image of the start point during preset
	movement and does not display the images
	which camera gets during preset movement.
	As soon as camera stops at preset end point,
	camera starts displaying live images which it
	gets at the end preset point. This feature also
	reduces bandwidth when working with digital
	systems or digital network systems.
	This function availability should be different
	by models.

37X Speed Dome Camera 34/50