Speco Technologies SIPSD37X, HTSD37X specifications Installation, ‰Communication Protocol Setup

INSTALLATION 2

‰Communication Protocol Setup

ON

ON

1 2 3 4

zSelect an appropriate Protocol with the DIP switch combination.

	Switch Mode
P0		P1	P2	Protocol
(Pin 1)		(Pin 2)	(Pin 3)
OFF		OFF	OFF	PELCO-D, 2400 bps
ON		OFF	OFF	PELCO-D, 9600 bps
OFF		ON	OFF	PELCO-P, 4800 bps
ON		ON	OFF	PELCO-P, 9600 bps
		Others		Reserved

zMatch the camera protocol with the camera protocol in the setting of your DVR or controller to control the camera.

zAdjust the DIP switch after turning off the camera. If you changed the camera protocol by changing the DIP S/W, the change will be effective after you reboot the camera.

zThe factory default protocol is “Pelco-D, 2400 bps”. (HTSD37X)

zThe factory default protocol is “Pelco-D, 9600 bps”. (SIPSD37X)

37X Speed Dome Camera 12/50